Carbon Adsorption Towers


Our Carbon Adsorption Towers are specifically designed to remove Oil and Oil Vapour from a compressed air stream. The compressed air (laden with oil Vapour) enters the bottom of the Coal Tower and flows upward through the bed and exits out the top. The Special Activated Carbon has a great affinity for Oil and Oil Vapour; therefore it works by adsorbing contaminates onto the surface of its internal pores and allows the Oil and Oil Vapour to be impregnated and retained onto the surface of the Carbon.  The Carbon Tower is primarily used to reduce oil Vapour in compressed air to very low concentrations. Other hydrocarbon Vapours normally absorbable by activated Carbon are also removable.


Carbon Adsorption Towers:

  • The Oxair Carbon Adsorption Tower consists of a single tower (pressure vessel) filled with a special Activated Carbon adsorbent
  • The large beds ensure sufficient contact time to produce the outlet concentrations as desired.
  • Separate fill and drain ports for ease of carbon replacement
  • No piping to disconnect
  • Stainless Steel screens and screen diffusers (top and bottom)
  • Life of Carbon is usually a minimum 3 years under constant operation

Contact Us

Please use the form below to send us your enquiry.
Telephone: +61 (08) 9303 9305
Fax: + 61 (08) 9303 9306

  • This field is for validation purposes and should be left unchanged.